MS Fittings in Dubai and the UAE: Black Malleable Iron Pipe Fittings

Black MI · for MS pipe · BSP & NPT · TUPY Brazil

MS Fittings in Dubai and the UAE: Black Malleable Iron Pipe Fittings

On a UAE site, "MS fittings" usually means the black, ungalvanised threaded fittings that go on MS (mild steel) pipe in fire-fighting, chilled-water, gas and compressed-air lines. Strictly, those threaded fittings are black malleable iron, not mild steel; true mild-steel fittings are forged or welded parts. ABMT supplies the threaded kind: TUPY black malleable iron fittings from Brazil, in BSP and in NPT Class 150 and Class 300, from Dubai.

Black MIthreaded, ungalvanised
BSP + NPTClass 150 and 300
UL · FMlisted fire figures
Since 2003Dubai, UAE

What "MS fittings" means on a UAE site

MS stands for mild steel, the material of black steel pipe. On site, though, the name is used for three different things, and mixing them up leads to wrong orders:

What the site calls itWhat it isJointSupplied by ABMT
MS threaded fittingsBlack malleable iron fittingsScrewed, BSP or NPTYes: TUPY black MI
Forged steel fittingsForged carbon steel, ASME B16.11Socket-weld or threaded, Class 2000-9000No
Butt-weld fittingsCarbon steel, ASME B16.9WeldedNo
MS pipeBlack steel pipe, BS EN 10255 or ASTM A53Threaded, welded or groovedNo: fittings only

This page is about the first: threaded fittings.

For the names in one table, see MI vs GI fittings explained.

Why black malleable iron is the threaded fitting for MS pipe

Malleable iron is ductile after annealing, so it takes a clean thread and stands up to wrench torque and knocks without cracking. The black finish suits lines that are painted, insulated or carry non-corrosive media: sprinkler and fire-fighting mains, chilled water, gas, compressed air and oil.

Matching the fitting to MS pipe

BS EN 10255 pipe (formerly BS 1387), medium or heavy, is threaded BSP taper to ISO 7-1: use TUPY BSP fittings. ASTM A53 or A106 Schedule 40 or 80 pipe is threaded NPT: use TUPY NPT. Check the BSP and NPT thread chart before ordering.

Class 150 or Class 300

Under ASME B16.3, NPT Class 150 fittings are rated up to 300 psi (21 bar), and Class 300 up to 2,000 psi (138 bar) in 1/4in to 1in, less in larger sizes. Details in Class 150 vs Class 300 fittings.

Fire-fighting lines and UL/FM

TUPY fire-protection figures are UL Listed and FM Approved, with the certificates on the UL/FM approvals page. Check your project specification for which listings it requires.

Sizes and figures in black

Elbows, tees, sockets, unions, nipples, bushes, plugs and caps, up to 6in depending on the figure. If your bill of quantities is written for BIS fittings, see BIS vs TUPY fittings. The figure finder below cross-references each fitting between BSP and NPT.

Figure finder: the same fitting in BSP and NPT

UAE and Gulf bills of materials mix trade names, BSP figure numbers and American class numbers. Find the fitting in its row and open the figure for sizes and dimensions; every NPT figure also has a datasheet PDF.

FittingBSP (EN 10242)NPT Class 150NPT Class 300
90° elbow90° elbow 90 TUPY9090° elbow 1015 TUPY101590° elbow 2015 TUPY2015
45° elbow45° elbow 120 TUPY12045° elbow 1025 TUPY102545° elbow 2025 TUPY2025
Street elbow (M/F)Street elbow (M/F) 92 TUPY92Street elbow (M/F) 1030 TUPY1030Street elbow (M/F) 2030 TUPY2030
Reducing elbowReducing elbow 90R TUPY90RReducing elbow 1020R TUPY1020R—
TeeTee 130 TUPY130Tee 1060 TUPY1060Tee 2060 TUPY2060
Reducing teeReducing tee 130R TUPY130RReducing tee 1065R TUPY1065RReducing tee 2065R TUPY2065R
CrossCross 180 TUPY180Cross 1068 TUPY1068—
Socket (coupling)Socket (coupling) 270 TUPY270Socket (coupling) 1045 TUPY1045Socket (coupling) 2045 TUPY2045
Reducing socketReducing socket 240 TUPY240Reducing socket 1050R TUPY1050RReducing socket 2050R TUPY2050R
Bush (M/F reducer)Bush (M/F reducer) 241 TUPY241Bush (M/F reducer) 1002R TUPY1002R—
NippleNipple 280 TUPY280—Nipple 2001 TUPY2001
PlugPlug 290 TUPY290Plug 1010 TUPY1010—
CapCap 300 TUPY300Cap 1055 TUPY1055Cap 2055 TUPY2055
UnionUnion 340 TUPY340Union 1070 TUPY1070Union 2070 TUPY2070
Threaded flangeThreaded flange 321 TUPY321Threaded flange 1090 TUPY1090—

— means the fitting is not made in that range. BSP to EN 10242 / ISO 49; NPT to ASME B16.3, threads to ASME B1.20.1.

MS (black MI) fittings supplied across the UAE

Quotations for black fittings are prepared in Deira, Dubai, for sites and stores in:

  • Dubai
  • Deira
  • Al Quoz
  • Jebel Ali
  • Dubai Investments Park
  • Abu Dhabi
  • Mussafah
  • Sharjah
  • Ajman
  • Umm Al Quwain
  • Ras Al Khaimah
  • Fujairah
  • Al Ain

Choose the TUPY fitting for your specification

Open an individual figure to check sizes, thread and finish. Confirm the approval for your exact figure and size in the catalogue before requesting a quotation.

Frequently asked questions

Are MS fittings the same as MI fittings?

On site, "MS fittings" usually means the black threaded fittings that go on MS pipe. Those fittings are made of black malleable iron (MI), not mild steel. MS is the pipe material; MI is the fitting material.

Do you supply forged steel or butt-weld fittings?

No. ABMT supplies TUPY threaded malleable iron fittings only, black and galvanised. Forged fittings to ASME B16.11 and butt-weld fittings to ASME B16.9 are different products.

Which thread suits MS pipe in the UAE?

BS EN 10255 pipe is threaded BSP taper, so use TUPY BSP fittings. ASTM A53 Schedule 40 or 80 pipe is normally threaded NPT, so use TUPY NPT Class 150 or 300. Do not mix the two.

Can black fittings be used for drinking water?

No. For potable water, exposed lines and coastal sites use galvanised (GI) fittings. The same figures are made in both finishes.

Do you supply MS pipe?

No, fittings only. We match the fitting to the pipe your project specifies.

Need a price for this market?

Send the figure, size, thread, finish, quantity and delivery city. Our Dubai team confirms item availability, lead time and freight for your destination, comparing Dubai supply and direct shipment from Brazil where both options are available.

Request a quoteWhatsApp
Chat with us