A bill of quantities in the UAE can list the same threaded fitting as "MI", "GI", "MS" or even "CI", and suppliers do not always use the words the same way. The names overlap because some describe the material and others the finish. This guide sorts them out so you can order the right fitting the first time.
1. MI is the material, GI is the finish
MI stands for malleable iron: cast iron that has been annealed so it becomes tough and slightly ductile instead of brittle. It is the material of almost every threaded pipe fitting used on water, fire, gas and air lines.
GI stands for galvanised iron. A GI fitting is a malleable iron fitting that has been hot-dip galvanised, coated in zinc to resist corrosion. A black MI fitting is the same fitting without the zinc. So every GI fitting is an MI fitting; "MI fittings" on its own usually means the black ones.
2. The four names side by side
| Name on the BOQ | What it usually means | Material | Typical use |
|---|---|---|---|
| MI fittings (black) | Ungalvanised threaded fittings | Malleable iron | Fire sprinkler mains, chilled water, gas, compressed air, oil |
| GI fittings | Hot-dip galvanised threaded fittings | Malleable iron + zinc | Water supply, exposed and outdoor lines, coastal sites |
| MS fittings | On site: black threaded fittings for MS pipe. Strictly: forged or welded steel parts | Malleable iron (threaded) or mild steel (forged / welded) | Same as black MI when threaded |
| CI fittings | Grey cast iron | Grey cast iron | Soil and drainage; not for threaded pressure lines |
3. What does "MI pipe" mean?
The full form of MI is malleable iron, but pipes are not made of malleable iron. The pipe is steel: GI pipe (galvanised steel, for example BS EN 10255) or MS / black pipe (mild steel). "MI pipe" is a loose trade term for a steel pipe line joined with MI fittings. When you order, name the pipe and the fittings separately.
4. When to choose black MI and when GI
- GI: drinking and domestic water, exposed or outdoor lines, irrigation, and anything near the coast, where the zinc protects against humidity and salt air.
- Black MI: fire sprinkler and hydrant lines, chilled water, gas, compressed air and oil, where the line is painted, insulated or carries a non-corrosive medium.
- Follow the finish of the pipe: GI fittings on GI pipe, black fittings on black pipe, so the protection is consistent along the line.
5. Why malleable iron and not grey cast iron
Grey cast iron is strong in compression but brittle: a knock from a wrench or a pressure surge can crack it. Annealing turns cast iron into malleable iron, which takes a clean thread, stands up to wrench torque and absorbs shock without cracking. That is why the standards for threaded fittings, EN 10242 / ISO 49 for BSP and ASME B16.3 for NPT, are written for malleable iron.
6. Brands buyers compare in the UAE
The threaded fittings sold in the Emirates come from several makers, among them BIS of Thailand, Indian makers carrying the ISI mark and TUPY of Brazil. They are all malleable iron; what differs is the maker, the standards each states and the fire-protection listings. Our page on BIS fittings vs TUPY compares the most common pairing line by line.
7. Where to buy in the UAE
Amini Building Materials Trading, in Dubai since 2003, is the exclusive TUPY Brazil agent for the region, with both finishes in BSP and NPT. For galvanised see our GI fittings supplier in UAE page; for black see the MI fittings supplier in UAE page and MS fittings in Dubai. The difference between the finishes is covered in more depth in galvanised vs black pipe fittings.
Send your list on WhatsApp +971 56 950 9061, by email to info@abmtgroup.com, or through the request a quote form.





