BIS Thailand · TUPY Brazil · GI & MI fittings compared
BIS Fittings in the UAE: BIS Thailand and TUPY Brazil Compared
In the UAE, "BIS fittings" means the malleable iron pipe fittings of BIS Pipe Fitting Industry Co., Ltd. of Thailand, a maker founded in 1974 whose GI and black fittings have long been sold in the Gulf. ABMT does not sell BIS: we are the exclusive agent for TUPY of Brazil, another malleable iron maker. This page compares the two fairly, so a buyer with a BIS line in the bill of quantities can see where TUPY is the same, where it differs, and how to quote one for the other.
BISThailand, since 1974
TUPYBrazil, since 1938
BSP + NPTsame threads, same pipe
UL · FMlisted TUPY fire figures
01
Who makes BIS fittings
BIS Pipe Fitting Industry Co., Ltd. is a Thai manufacturer, founded in 1974, of malleable iron pipe fittings for water, gas, oil and air. The company states that its fittings are made to American, British and European standards, that its quality system is ISO 9001 certified by Bureau Veritas, and that it exports to more than 40 countries.
In the UAE trade BIS is a brand name, which is why directory listings read "BIS Thailand GI fittings". It is not the Indian BIS / ISI mark: that is a certification carried by Indian-made fittings to IS 1879, and it shares only the three letters.
02
BIS fittings and TUPY fittings side by side
| BIS fitting | TUPY fitting |
|---|
| Maker | BIS Pipe Fitting Industry Co., Ltd., Thailand | TUPY, Joinville, Brazil |
| Founded | 1974 | 1938 |
| Material | Malleable iron | Malleable iron |
| Standards the maker states | American (ANSI/ASTM), British (BS EN) and European (DIN/EN) | EN 10242 / ISO 49 (BSP); ASME B16.3 (NPT) |
| Threads | BSP and NPT | BSP to ISO 7-1; NPT Class 150 and 300 |
| Finishes | Galvanised (GI) and black | Galvanised (GI) and black, figure for figure |
| Quality system | ISO 9001, certified by Bureau Veritas | ISO 9001 / 14001 / 45001, Bureau Veritas |
| Fire-protection listings | Ask for the UL / FM certificate of the exact figure | UL Listed and FM Approved figures |
| Supply in the UAE | Several distributors and traders | ABMT, exclusive TUPY agent, Dubai |
03
Will a TUPY fitting replace a BIS fitting?
Yes, thread for thread. A BIS BSP fitting is replaced by a TUPY BSP fitting, and a BIS NPT fitting by a TUPY NPT fitting, in the same nominal size, on the same pipe. Both are malleable iron, so the wall, the thread engagement and the way the joint is made up are the same on site.
Check the pattern as well as the size where it matters, for example union seats, hexagon nipples or reducing tees, and never mix BSP with NPT. The BSP and NPT thread chart shows the difference.
04
Where the two differ
The maker, the country of origin, the standards each maker states and the fire-protection listings. Where a specification asks for UL Listed or FM Approved fittings, ask for the certificate of the exact figure, whichever brand is offered. The listed TUPY figures and their certificates are on the UL/FM approvals page.
If the specification or the approved-vendor list names BIS, buy BIS. If it allows an equal-and-approved alternative, the submittal for TUPY is made with its datasheets and the international certificates on the standards page. No local approval is claimed.
05
Quoting TUPY against a BIS line
Send the bill of quantities as it is written, BIS descriptions and sizes included. We return the matching TUPY figure, finish and thread for every line, so the two can be compared item by item.
06
Sizes and figures
TUPY fittings run from 1/8in to 6in: elbows, tees, sockets, unions, nipples, bushes, plugs and caps, in galvanised and in black. For galvanised see GI fittings in the UAE; for black see MS (black MI) fittings in Dubai. The figure finder below cross-references each fitting between BSP and NPT.
Where are BIS fittings made?
In Thailand, by BIS Pipe Fitting Industry Co., Ltd., a malleable iron fitting maker founded in 1974.
Is BIS the same as the Indian BIS / ISI mark?
No. They share the letters only. The Indian mark is a certification, shown as ISI, on Indian-made fittings to IS 1879. In the UAE trade, "BIS fittings" means the Thai brand.
Are TUPY fittings BIS fittings?
No. TUPY is a different maker: malleable iron fittings made in Brazil to EN 10242 / ISO 49 in BSP and ASME B16.3 in NPT, with UL Listed and FM Approved fire figures.
Can a TUPY fitting replace a BIS fitting?
Yes, BSP for BSP and NPT for NPT, in the same size on the same pipe. Check special patterns such as unions and hexagon nipples figure by figure.
Do you sell BIS fittings?
No. ABMT is the exclusive TUPY Brazil agent in Dubai and supplies TUPY only. Send a bill of quantities written for BIS and we will quote the matching TUPY figures, item by item.
Need a price for this market?Send the figure, size, thread, finish, quantity and delivery city. Our Dubai team confirms item availability, lead time and freight for your destination, comparing Dubai supply and direct shipment from Brazil where both options are available.
Request a quoteWhatsApp