Azerbaijan sits on the Caspian rather than an open-sea route, so routing is agreed per shipment and the specification question tends to matter more than the freight one — much of the demand is oil-and-gas work where the thread standard is settled first. Galvanised iron (GI) and malleable iron (MI) threaded fittings are supplied from the Dubai stock or direct from Brazil.
The oil and gas sector sets the standard. Contracts written by international engineering contractors call for NPT to ANSI B16.3 in Class 150 and Class 300, and they ask for the material documentation to match - mill test certificates, certificate of origin, and manufacturer certification that a reviewer recognises. That is the part of the offer that matters most in this market.
Alongside it sits the ordinary work: gas distribution and service connections, where TUPY's DVGW approval is the relevant document, and water, plumbing and heating in galvanised iron (GI) to BSP. Both thread forms come from the same foundry, so one supplier covers a site that needs NPT for plant and BSP for buildings.
There is no standing port of entry; it is agreed shipment by shipment with the buyer and their forwarder. Container quantities can be shipped from Brazil to a nominated discharge point, and mixed or urgent orders are released from the Dubai stock. Because the final leg is overland, consolidating into fewer, larger movements usually beats shaving the sea freight - both are costed in the same quotation so the comparison is made on the complete figure.
Production and inspection sit under Bureau Veritas–surveyed ISO 9001, ISO 14001 and ISO 45001 systems, and each shipment into Azerbaijan carries its mill test certificate and certificate of origin — the paper an oil-and-gas package is read against.
Where a project or authority requires a local conformity registration in addition to the above, that is handled per project with the consultant and the importer of record.
Into Azerbaijan the range spans elbows, tees, sockets, unions, bushes, nipples, plugs, caps, crosses and reducing figures from 1/4in to 6in, galvanised or black, BSP and NPT Class 150 and 300, alongside the TUPYPRES press-fit system. Every figure, dimension and weight is published on the site.
Yes — the oil-and-gas work here that specifies NPT gets ANSI B16.3 in Class 150 and Class 300 from the same foundry as the BSP range. Send the spec so thread form and class are fixed first.
Agreed per shipment with the buyer and their forwarder. Container quantities can come direct from Brazil; mixed and urgent orders are released from the Dubai stock. Both are quoted.
TUPY holds DVGW approval, which is the document gas work asks for. It is held by the manufacturer in Brazil and covers the figures identified in the catalogue.
Yes. BSP and NPT are made by the same manufacturer, so a site needing NPT for plant and BSP for buildings can be supplied from one order and one set of documents.
Send the figures, sizes and quantities and both routes will be quoted - ex-stock Dubai and direct from Brazil - so the landed cost can be compared.
Request a quote
