Home › Blog › GI & MI Pipe Fittings in Kuwait and Bahrain: A Buyer's Guide
Galvanised Pipe

GI & MI Pipe Fittings in Kuwait and Bahrain: A Buyer's Guide

22 November 2026 TUPY content team 0 comments
GI & MI Pipe Fittings in Kuwait and Bahrain: A Buyer's Guide

Contractors and MEP buyers in Kuwait and Bahrain use threaded GI and black MI pipe fittings on the same work as the rest of the Gulf: water supply and risers, fire-sprinkler mains, gas, compressed air and plant services. The questions they ask us are also much the same: how the goods arrive, which thread to order, galvanised or black, and what to send with an enquiry. This guide answers them for Kuwait City, Ahmadi and Jahra, and for Manama, Muharraq and Sitra.

1. How fittings reach Kuwait and Bahrain

TUPY Brazil fittings are held in Dubai. For site orders, goods can be loaded ex-stock in Dubai and sent by road through Saudi Arabia; Bahrain is reached over the King Fahd Causeway. For larger project quantities, a full container can be shipped direct from Brazil to Shuwaikh Port in Kuwait or Khalifa bin Salman Port in Bahrain. We quote both routes so you can compare landed cost.

City / areaUsual entryTypical route from us
Kuwait City, Shuwaikh, HawalliShuwaikh Port or roadEx-stock Dubai by road, or full container direct
Ahmadi, Fahaheel, south KuwaitShuwaikh or roadEx-stock Dubai by road, or container via Shuwaikh
Jahra, north KuwaitRoad via Kuwait CityEx-stock Dubai by road
Manama, Muharraq, SitraKhalifa bin Salman Port or the CausewayEx-stock Dubai by road, or full container direct

2. BSP or NPT?

Building water and plumbing work in both countries mostly follows British practice and uses BSP threads on GI pipe. Oil and gas, refinery and industrial plant work designed to American codes often calls for NPT, in Class 150 or Class 300. Check the drawing before ordering: the two threads look alike in 1/2" and 3/4" but do not seal together. Our BSP and NPT thread chart shows the sizes side by side, and the free PDF can be printed for site.

Tip: if an enquiry only says "GI fittings 1 inch", ask whether the pipe is threaded BSP or NPT, and whether it is EN 10255 or ASTM A53 pipe. The GI pipe sizes and specifications chart helps you tell them apart.

3. GI or black MI in Gulf heat and coastal air

Both Kuwait and Bahrain are hot, and much of the building work is close to the sea. Galvanised (GI) fittings are the safer choice for water supply, exposed lines and anything outdoors, because the zinc coat protects the iron. Black MI fittings suit painted, insulated or closed systems: fire-sprinkler mains, chilled water, gas and compressed air. TUPY makes the same figures in both finishes; the MI vs GI fittings guide explains the names.

4. Fire-protection lines

Where a fire-fighting specification asks for UL Listed or FM Approved threaded fittings, ask for the certificate of the exact figure and size. TUPY's listed figures are on our UL/FM approved fittings page. We state only TUPY's international certifications, among them UL, FM, ISO and Bureau Veritas. Approval of the fire system itself by the local authority is a project matter for the contractor and consultant.

5. The words buyers use

On sites in Kuwait and Bahrain the same part goes by several names. "Bib hadid" (بيب حديد) or "mawasir hadid" (مواسير حديد) is the iron pipe; GI fittings are often called وصلات مجلفنة; a socket is a جلبة, a nipple a نبل, a cap a طبة. Our pipe fitting names in English and Arabic lists them all with the TUPY figure number.

6. What to send with an enquiry

  • The list of fittings with sizes and quantities, or the BOQ page.
  • Thread (BSP or NPT) and, for NPT, Class 150 or 300.
  • Finish: galvanised (GI) or black (MI).
  • Delivery city, and whether you want ex-stock by road or a full container to Shuwaikh or Khalifa bin Salman.
  • Any certificates the consultant will ask for.

Send it on WhatsApp +971 56 950 9061 or to info@abmtgroup.com. For local detail see our pages on pipe fittings in Kuwait and pipe fittings in Bahrain.

Tags:

Related TUPY fittings

Technical specifications, dimensions and the figure number of each fitting are on its own page.

View all TUPY threaded fittings →

Comments (0)

Leave a comment

Chat with us