Home › Blog › GI & MI Pipe Fittings in Jeddah and Dammam: A Buyer's Guide
Galvanised Pipe

GI & MI Pipe Fittings in Jeddah and Dammam: A Buyer's Guide

13 November 2026 TUPY content team 0 comments
GI & MI Pipe Fittings in Jeddah and Dammam: A Buyer's Guide

Contractors and MEP buyers in Jeddah and Dammam order threaded pipe fittings for the same jobs as everywhere in the Gulf: water and drainage risers, fire-sprinkler mains, gas lines, compressed air and plant services. What differs is the port, the thread most specifications call for, and how the order is put together. This guide covers the questions buyers on the Red Sea and Eastern Province sides ask us most often.

1. Two ports, two coasts

Saudi Arabia is served by two main container gateways for fittings coming from abroad: Jeddah Islamic Port on the Red Sea, for Jeddah, Makkah, Madinah and the western region, and King Abdulaziz Port, Dammam on the Gulf, for Dammam, Al Khobar, Jubail and the Eastern Province. TUPY Brazil fittings for the region are stocked in Dubai and can also be shipped direct from Brazil to either Saudi port when the order is large enough for the landed cost to favour it. We quote both routes so you can compare.

City / regionUsual portTypical route from us
Jeddah, Makkah, Madinah, YanbuJeddah Islamic PortEx-stock Dubai by sea, or full container direct from Brazil
Dammam, Al Khobar, DhahranKing Abdulaziz Port, DammamEx-stock Dubai by sea or road, or full container direct from Brazil
Jubail, Ras TanuraJubail / DammamSame as Dammam
Riyadh and Central regionDammam (then inland)See our Riyadh and Doha buyer's guide

2. BSP or NPT? Check the drawing first

Both thread systems are used in the Kingdom. Building services in residential and commercial towers are usually drawn with BSP taper threads (ISO 7-1), the same as GI pipe threaded on site. Industrial plants, petrochemical work and projects designed to US practice in the Eastern Province often specify NPT (ASME B1.20.1) and malleable iron fittings to ASME B16.3, Class 150 or Class 300. The two threads are not interchangeable, so the thread type should be on every line of the BOQ. Our BSP and NPT thread chart shows the threads per inch and diameters for each size.

Tip: if a quotation request just says "GI fittings 2 inch", ask whether the pipe is threaded BSP or NPT before ordering. It is the most common cause of returned fittings.

3. GI or black MI?

GI (galvanised) malleable iron fittings are the normal choice for water, drainage vents and most sprinkler work, where the zinc coat protects against corrosion, which matters on humid coastal sites in Jeddah and Dammam. Black MI fittings are used for gas, steam, oil and compressed-air lines and wherever the system will be painted. See galvanised vs black pipe fittings for the full comparison, and our GI fittings page for how BIS and MS fittings compare with malleable iron.

4. Fire-protection lines: UL Listed and FM Approved

For sprinkler and fire-fighting systems designed to NFPA 13, consultants usually ask for fittings that are UL Listed and FM Approved. TUPY threaded fittings carry both, and the listings can be checked in the UL and FM databases. More detail is on our UL/FM approved fittings page.

5. What to send with your enquiry

  1. Each item with its size (1/4" to 6"), shape (elbow, tee, socket, union, reducer and so on) and quantity.
  2. Thread type: BSP or NPT, and for NPT the class (150 or 300).
  3. Finish: galvanised (GI) or black.
  4. Delivery city and whether you prefer ex-stock Dubai or a direct container.
  5. Any approvals the consultant requires (UL, FM, ISO 9001 certificates).

If your BOQ uses another maker's figure numbers, our TUPY figure number cross-reference helps match each line. The full range is on the products page, and the country page pipe fittings in Saudi Arabia has more on the Saudi market.

6. About TUPY and Amini Building Materials Trading

TUPY is a Brazilian foundry group that has made malleable iron pipe fittings for decades, to EN 10242 / ISO 49 and ASME B16.3, under ISO 9001 quality management. Amini Building Materials Trading LLC, registered in Dubai since 2003, is the exclusive TUPY distributor for the Middle East and supplies contractors and traders across Saudi Arabia from Dubai.

Send your list on WhatsApp +971 56 950 9061, by email to info@abmtgroup.com, or through the request a quote form.

Buying in the UAE? Genuine TUPY Brazil fittings are stocked in Dubai: see our GI fittings supplier in UAE and MI fittings supplier in UAE pages, in BSP and NPT, galvanised and black.
Tags:

Related TUPY fittings

Technical specifications, dimensions and the figure number of each fitting are on its own page.

View all TUPY threaded fittings →

Comments (0)

Leave a comment

Chat with us