Contractors in Riyadh and Doha buy the same galvanised (GI) and malleable iron (MI) threaded fittings, but they do not specify them the same way. Riyadh and the rest of Saudi Arabia work with both British and American pipe, so the thread decides the fitting. Doha works mostly to British-standard pipe with BSP threads and a consultant submittal behind every order. This guide sets out what each city asks for and how to order TUPY fittings for it.
Riyadh: check the thread before the fitting
Saudi projects use two pipe families side by side: EN 10255 (BS 1387) GI pipe threaded BSP, and ASTM A53 pipe threaded NPT. Fire-protection systems designed to NFPA usually run on NPT; domestic water and building services often run on BSP. Before you order, confirm which thread the pipe on site carries – a BSP fitting will not seal on an NPT thread.
- NPT jobs: TUPY NPT Class 150 for water and fire lines, Class 300 for compressed air, steam and higher pressures.
- BSP jobs: TUPY BSP fittings to EN 10242, galvanised or black, 1/4″ to 6″.
- Fire protection: use the UL Listed and FM Approved figures; the full list is on the UL/FM approved fittings page.
Fittings for Riyadh are usually routed through Dammam and trucked inland, or re-exported from the range held in Dubai for smaller mixed orders. Jeddah orders can land at Jeddah Islamic Port. See the Saudi Arabia page for both routes.
Doha: BSP, submittals and certificates
In Qatar most GI pipe on building and MEP work is EN 10255 medium series with BSP taper threads, and every material goes through a consultant submittal. What the consultant asks for is consistent: the manufacturer’s catalogue and data sheets, the standard the fittings are made to, mill test certificates and the certificate of origin.
- Standard: TUPY BSP fittings are made to EN 10242 / ISO 49.
- Documents: catalogue, data sheet per figure, mill certificate and certificate of origin ship with the goods.
- Fire lines: UL Listed and FM Approved figures for sprinkler mains.
Goods for Doha arrive through Hamad Port, either as a full container from Brazil or re-exported from Dubai. See the Qatar page for Doha, Al Wakrah and Lusail.
Ordering checklist for both cities
- Thread: BSP or NPT – and for NPT, Class 150 or Class 300.
- Finish: galvanised (GI) or black.
- Figure and size: use the figure number cross-reference and the GI pipe sizes chart to match the pipe.
- Approvals: say if the line is fire protection, so UL/FM figures are quoted.
- Documents: list the submittal documents the consultant needs.
- Delivery point: city or port, so both routes can be costed.
Send the list on WhatsApp +971 56 950 9061 or through the quote form. ABMT is the exclusive TUPY Brazil agent for the Gulf.





