طبة TUPY Brazil figure 300
Figure 300

طبة — TUPY Brazil fittings

الطبة من توپي البرازيل (الشكل رقم 300) لها سن أنثى وتُربط فوق نهاية ماسورة أو نبل لإغلاق نهاية الخط.

المواصفات الفنية

رقم الشكل300
مدى المقاساتمن 1/4 بوصة إلى 6 بوصات
التشطيبGalvanised and black
السنBSP
المواصفةEN 10242 / ISO 49
أقصى ضغط تشغيل25 بار
الخامةحديد زهر مطاوع

المواصفات والشهادات

UL Listed
مدرج لدى UL
FM Approved
معتمد من FM
ISO
ISO
ABNT
ABNT
INMETRO
INMETRO
DVGW
DVGW

تُصنَّع وصلات TUPY البرازيل وتُفحص تحت إشراف الهيئات الدولية المذكورة أعلاه، وتحمل اعتمادات معترفًا بها للاستخدام في شبكات الحماية من الحريق والمياه والغاز.

Technical drawing — طبة

Dimensional drawing of the طبة TUPY Brazil - figure 300
Dimensional drawing of the طبة — figure 300. The value behind each letter is given in the dimensions and weights table on this page.

Dimensions and weights — طبة

حروف الأبعاد تتبع الرسم الفني أعلاه. والأوزان لكل وصلة مفردة بالكيلوجرام.

القطر الاسمي الأبعاد (مم) الوزن (كجم)عدد القطع في الكرتونة
بوصة مم a مجلفن أسود
1/2" 15 23 0.059 0.053300
3/4" 20 25 0.092 0.084170
1" 25 29 0.154 0.140140
1.1/4" 32 31 0.220 0.21090
1.1/2" 40 31 0.264 0.25970
2" 50 38 0.436 0.41650
2.1/2" 65 42 0.779 0.779
3" 80 46 1.033 0.998
4" 100 56 1.862 1.822
6" 150 63 3.715 3.665

المصدر: الكتالوج الرسمي لوصلات BSP الملولبة من TUPY البرازيل.

تحتاج سعرًا لهذه الوصلة؟

أرسل لنا الأشكال والمقاسات التي تحتاجها وسيوافيك مكتبنا في دبي بعرض السعر وحالة المخزون ومدة التوريد.

اطلب عرض سعر

About the طبة

الطبة، بخلاف السدادة، لها سن داخلي وتُربط فوق نهاية ماسورة أو نبل. وكلتاهما تغلقان الخط، لكنهما تُستخدمان في مواضع مختلفة: السدادة تدخل في فتحة أنثى، والطبة تُركّب فوق فتحة ذكر.

وفي أعلى الرايزرات، وعلى أطراف المواسير الاحتياطية، وعند نقاط نهاية شبكات مكافحة الحريق، تكون الطبة الخيار المعتاد، لأن تركيبها فوق طرف الماسورة أبسط من إضافة وصلة أنثى ثم سدادة.

والطبة، كالسدادة، تحمل دائماً ضغط الخط الكامل. والجسم السداسي يتيح شدّها بمفتاح وتطبيق عزم كافٍ لإحكام موثوق.

تُورَّد طبة توپي بالشكل رقم 300: حديد زهر مطاوع، سن BSP حسب EN 10242 و ISO 49، مجلفنة وسوداء.

Frequently asked questions about the طبة

In which sizes is the TUPY Brazil طبة made?

The TUPY Brazil طبة is made in 10 sizes, from 1/2" to 6". The full list of sizes, with the dimensions in millimetres and the weight of each piece, is in the dimensions and weights table on this page.

How much does one TUPY طبة weigh?

The weight depends on the size: the 1" size, for example, weighs 0.154 kg galvanised and 0.140 kg black. The weights of every size are taken from the official TUPY catalogue and are listed in the table on this page, so they can be used to work out shipping weight and freight cost.

Is the thread on the TUPY طبة BSP or NPT?

TUPYBSP fittings are threaded to BSP in accordance with ISO 7-1; the male thread is tapered and the seal is made on the thread itself. BSP is not interchangeable with NPT, and screwing the two together will leak. TUPY also produces a separate NPT line, which is covered in the downloads section.

What is the difference between the figure 290 plug and the figure 300 cap?

The figure 290 plug is male threaded and screws into the female end of a pipe or fitting. The figure 300 cap is female threaded and fits over the male end of a pipe. Both blank off the end of a line, and the choice between them depends only on which thread has to be closed.

What is the maximum working pressure and temperature of TUPY fittings?

According to TUPY's technical catalogue, the working pressure of TUPYBSP fittings is 25 bar between −20 °C and +120 °C. It falls to 20 bar above 300 °C, and intermediate values are interpolated. The design pressure in the hydrostatic test is 100 bar for sizes up to 4 in and 64 bar for 5 in and 6 in.

To which standards is the TUPY طبة manufactured?

The TUPY طبة is manufactured to EN 10242 / ISO 49. TUPY malleable cast iron fittings are built to ISO 49, EN 10242 and ABNT NBR 6943, and their threads follow ISO 7-1. The factory certificates can be seen in the standards and certifications section on this page.

How can you tell a genuine TUPY Brazil طبة?

On the body of every genuine TUPY fitting the factory mark, the figure number and the size are raised in the casting, not etched or printed. The threads are clean and free of burrs, and the galvanised coating is even. The surest check is to weigh the piece and compare it with the weight table on this page; counterfeit pieces usually come out lighter than the official catalogue weight.

How do I get a quotation for the طبة?

Use the request a quote page at /request-a-quote and tell us the figure number (300), the sizes and the quantities you need. Our Dubai office will come back with a quotation, the current stock position and a lead time. Amini Building Materials Trading L.L.C is the exclusive agent of TUPY S.A. in the Middle East and supplies the region from Dubai.

دليل التركيب والربطأسنان BSP وتحديد المقاسضغط ودرجة حرارة التشغيل

وصلات TUPY البرازيل الملولبة الأخرى