كوع 45° ذكر/أنثى TUPY Brazil figure 121
Figure 121

كوع 45° ذكر/أنثى — TUPY Brazil fittings

الكوع 45° ذكر/أنثى من توپي البرازيل (الشكل رقم 121) كوع بزاوية 45° بسن أنثى وسن ذكر.

المواصفات الفنية

رقم الشكل121
مدى المقاساتمن 1/2 بوصة إلى 1 بوصة
التشطيبGalvanised and black
السنBSP
المواصفةEN 10242 / ISO 49
أقصى ضغط تشغيل25 بار
الخامةحديد زهر مطاوع

المواصفات والشهادات

UL Listed
مدرج لدى UL
FM Approved
معتمد من FM
ISO
ISO
ABNT
ABNT
INMETRO
INMETRO
DVGW
DVGW

تُصنَّع وصلات TUPY البرازيل وتُفحص تحت إشراف الهيئات الدولية المذكورة أعلاه، وتحمل اعتمادات معترفًا بها للاستخدام في شبكات الحماية من الحريق والمياه والغاز.

Technical drawing — كوع 45° ذكر/أنثى

Dimensional drawing of the كوع 45° ذكر/أنثى TUPY Brazil - figure 121
Dimensional drawing of the كوع 45° ذكر/أنثى — figure 121. The value behind each letter is given in the dimensions and weights table on this page.

Dimensions and weights — كوع 45° ذكر/أنثى

حروف الأبعاد تتبع الرسم الفني أعلاه. والأوزان لكل وصلة مفردة بالكيلوجرام.

القطر الاسمي الأبعاد (مم) الوزن (كجم)عدد القطع في الكرتونة
بوصة مم abz مجلفن أسود
3/8" 10 202510 0.043 0.041
1/2" 15 22289 0.065 0.062200
3/4" 20 253210 0.106 0.101140
1" 25 283711 0.167 0.16190

المصدر: الكتالوج الرسمي لوصلات BSP الملولبة من TUPY البرازيل.

تحتاج سعرًا لهذه الوصلة؟

أرسل لنا الأشكال والمقاسات التي تحتاجها وسيوافيك مكتبنا في دبي بعرض السعر وحالة المخزون ومدة التوريد.

اطلب عرض سعر

About the كوع 45° ذكر/أنثى

يؤدي الكوع 45° ذكر/أنثى العمل نفسه الذي يؤديه الكوع ذكر/أنثى العادي — طرف ذكر وطرف أنثى — إلا أن تغيير الاتجاه 45° بدل 90°.

وهذا الجمع يجعله مفيداً جداً في الخطوط المائلة: فهو يدير الخط بزاوية منخفضة ويتصل مباشرة بالمعدات ذات الفتحات الأنثى، دون نبل وسيط.

وتغيير الاتجاه 45° يسبب خسارة ضغط أقل من 90° ويترك السريان أقل اضطراباً، وهو ما يهم في خطوط الضخ والخطوط عالية السرعة.

يُورَّد الكوع 45° ذكر/أنثى من توپي بالشكل رقم 121: حديد زهر مطاوع بسن BSP حسب EN 10242 و ISO 49، بمقاسات من 1/2 بوصة إلى 1 بوصة.

Frequently asked questions about the كوع 45° ذكر/أنثى

In which sizes is the TUPY Brazil كوع 45° ذكر/أنثى made?

The TUPY Brazil كوع 45° ذكر/أنثى is made in 4 sizes, from 3/8" to 1". The full list of sizes, with the dimensions in millimetres and the weight of each piece, is in the dimensions and weights table on this page.

How much does one TUPY كوع 45° ذكر/أنثى weigh?

The weight depends on the size: the 1" size, for example, weighs 0.167 kg galvanised and 0.161 kg black. The weights of every size are taken from the official TUPY catalogue and are listed in the table on this page, so they can be used to work out shipping weight and freight cost.

Is the thread on the TUPY كوع 45° ذكر/أنثى BSP or NPT?

TUPYBSP fittings are threaded to BSP in accordance with ISO 7-1; the male thread is tapered and the seal is made on the thread itself. BSP is not interchangeable with NPT, and screwing the two together will leak. TUPY also produces a separate NPT line, which is covered in the downloads section.

What is the difference between the 90° elbow, the 45° elbow, the reducing elbow and the street elbow?

The figure 90 elbow turns the pipe run through 90° and is female at both ends. The figure 120 45° elbow is used for a gentler change of direction and a lower pressure drop. The figure 90R reducing elbow has two ends of different diameter, so it changes direction and diameter in one fitting. The figure 92 street elbow is male at one end and female at the other and screws straight into the next fitting without a socket; its 45° version is figure 121.

What is the maximum working pressure and temperature of TUPY fittings?

According to TUPY's technical catalogue, the working pressure of TUPYBSP fittings is 25 bar between −20 °C and +120 °C. It falls to 20 bar above 300 °C, and intermediate values are interpolated. The design pressure in the hydrostatic test is 100 bar for sizes up to 4 in and 64 bar for 5 in and 6 in.

To which standards is the TUPY كوع 45° ذكر/أنثى manufactured?

The TUPY كوع 45° ذكر/أنثى is manufactured to EN 10242 / ISO 49. TUPY malleable cast iron fittings are built to ISO 49, EN 10242 and ABNT NBR 6943, and their threads follow ISO 7-1. The factory certificates can be seen in the standards and certifications section on this page.

How can you tell a genuine TUPY Brazil كوع 45° ذكر/أنثى?

On the body of every genuine TUPY fitting the factory mark, the figure number and the size are raised in the casting, not etched or printed. The threads are clean and free of burrs, and the galvanised coating is even. The surest check is to weigh the piece and compare it with the weight table on this page; counterfeit pieces usually come out lighter than the official catalogue weight.

How do I get a quotation for the كوع 45° ذكر/أنثى?

Use the request a quote page at /request-a-quote and tell us the figure number (121), the sizes and the quantities you need. Our Dubai office will come back with a quotation, the current stock position and a lead time. Amini Building Materials Trading L.L.C is the exclusive agent of TUPY S.A. in the Middle East and supplies the region from Dubai.

دليل التركيب والربطأسنان BSP وتحديد المقاسضغط ودرجة حرارة التشغيل

وصلات TUPY البرازيل الملولبة الأخرى